Trafficware Trafficware
Trafficware Ltd    Trafficware Forum    Trafficware Forum  Hop To Forum Categories  SimTraffic™ 6    Min Green (Version 6)
Go
New
Find
Notify
Tools
Reply
  
5-star Rating (1 Vote) Rate It!  Login/Join 
Member
Posted
I've noticed in version 6 of SimTraffic, that the min green timer doesn't start timing until a conflicting call is received.

For example, say phases 2 & 6 have a 20 second min green, and phase 2 & 6 have been on for more than 20 seconds. When a conflicting call is received on phase 4 or 8, and no calls exist on 2 & 6, instead of advancing to phase 4 & 8, phase 2 & 6 will dwell for at least another 20 seconds (depending if further calls are received on phase 2 & 6). This operation resembles a detector delay.

This issue occurs when the phase is on "Min or "No recall" and running un-coordinated. Version 5 did not exhibit this issue.

Thanks,

Jason
 
Posts: 44 | Location: Toronto, Ontario, Canada | Registered: Sun March 16 2003Reply With QuoteEdit or Delete MessageReport This Post
Member
Picture of John Albeck
Posted Hide Post
Hi Jason,

Thanks for this information. I will pass this onto the programmer to see if a fix can be made.

Thanks,

John.


John Albeck
Trafficware
 
Posts: 995 | Registered: Fri March 14 2003Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

Trafficware Ltd    Trafficware Forum    Trafficware Forum  Hop To Forum Categories  SimTraffic™ 6    Min Green (Version 6)

© 2006 Trafficware Ltd