How do I code the Pedestrian phase crudely drawn in the Yellow circle.. The ped comes up on demand with the with the EBL & SBR..

So far all I can get is a ped crossing with all red.

2& 3 are overlapped..

Any help or Ideas would be appreciated..
Thanks...

Ted,

Assuming you are using an 8-phase, 2 ring setup, I would code:

-the SBR & EBL as phase 3 (as you have now)
-The WBT as phase 2 (as you have now)
-the pedestrian phase as phase 7,
-the EBT through movement as phase 2 & phase 8. Set a max recall for phase 8.

In the absense of a pedestrian call, the SBR, EBL & EBT will run concurrently (as currently occuring)

In the presence of a pedestrian call, the SBR, EBL & pedestrian phase will run concurrently. The EBT movement will receive a red signal. Once the pedestrian phase ends, the EBT movement will start up (until the SBR & EBL movements max/gap out)

I have done this in the past and would be glad to send you an example.

- Jason